THE OMIUS TECHNOLOGY & HOW TO USE IT
How does the technology work?
When water or sweat evaporates on the surface of the skin it absorbs heat and cools the body.
The amplified cooling effect of the Omius technology comes from water being absorbed into the cooling pieces where it has 5x more surface area for evaporation. The transformation of water from a liquid to a gas on the surface of the graphite pulls heat from the inside of the cooling pieces which are in contact with the skin and thus cooling the skin.
Because the cooling effect is driven solely by water evaporation the effect will continue indefinitely as long as the cooling pieces are wet and have airflow across them.
What is the material in the cooling pieces?
The cooling pieces are made of a highly thermally conductive graphite coated in a hydrophilic coating that optimizes the uptake and evaporation of the water that powers the cooling effect.
Do I need to put the cooling pieces in the freezer?
NO! The only requirement for amplified cooling is that the cooling pieces are wet during use, sit in direct contact with the skin and are uncovered so air can flow across them to enhance the evaporation.
For how long does the technology cool during use?
The cooling pieces will continue to cool indefinitely as long as they are wet, sit in direct contact with the skin and are uncovered so air can flow across them.
Why do the cooling pieces not feel cold after I have worn it for 5 minutes?
The headband cools via direct contact of the skin with the graphite. After about 5 minutes, the thermal receptors in the skin stop noticing the temperature gradient between the warm skin and the cooler graphite and instead perceive it as the “new normal”. But the cooling effect persists and can be detected by moving the headband slightly so the graphite comes in contact with skin that has not yet adapted to the “new normal”.
Does the technology wear out?
No. The cooling technology will work indefinitely as long as it is maintained with regular washes and care in handling.
Do I need to keep the cooling pieces wet at all times?
No. The cooling pieces can be stored dry and then re-soaked before each use.
TREAT WITH CARE
The cooling pieces are fragile and can chip or break from normal wear and tear. The most important thing you can do to maintain your Omius product is to always handle the cooling pieces with great care. Think of your headgear as a premium pair of sunglasses that you don’t want to scratch. Do not hit the cooling pieces on hard surfaces and always store in a safe place when not in use.
KEEP WET
The cooling power of the technology comes from the evaporation of the water in the cooling pieces. It is therefore critical that the cooling pieces are kept wet at all times while in use. Soak the material prior to usage and add water regularly throughout the session. Sweat alone will not be enough for maximum performance.
DON'T COVER
In order to get maximum performance from the cooling pieces you want to ensure maximum airflow. It is important that you never cover the cooling pieces as it will reduce airflow and risk damaging them. The required airflow comes naturally from walking, running or biking and when you are stationary, a fan can provide the airflow needed.
SKIN CONTACT
The technology evaporates water on the outer surfaces of the cooling pieces and then pulls the heat from the flat surface resting on the skin. Omius products are designed to keep the cooling pieces flat against the forehead to ensure maximum heat transfer. Be sure not to have hair between the skin and cooling pieces
CLEAN
It is important to regularly wash salts and other impurities off the pieces. GENTLY hand wash the headband and BACKSIDE ONLY of the cooling pieces using soft soap (dishwashing soap works great!). Soak in soapy water to get impurities off all surfaces. Rinse thoroughly to get rid of all the soap.
